SHRINKABLE TUBE 9.5mm – BLACK

Colour: black

Length: 1.2m

Bore as supplied min.: 9.5mm

Shrink temperature: 90°C

Temperature range : 125°C

Radial shrinking ratio: >50%

Longitudinal change: <5%

Tensile strength: >10.4 MPa

Ultimate elongation: >200 %

Aging in circulating-air oven: 158.0±1.0°C, 168hrs

Tensile strength: >7.3MPa

After aging:

Ultimate elongation: >100%

Volume resistivity: >1014 Ohm.cm

Dielectric strength: >15 KV/mm

Flammability: VW-1

Concentricity: >65%

Heat-shrinkable tubing is universally applied for the insulation of connections or for the end-handling of electric wire, for the insulation of soldered points on resistors and capacitors, for the identification and encapsulation of electric wire, for the corrosion-proofing of metallic rods or tubes and for the protection of antennas. Heat-shrinkable tubes are used for the corrosion-proof and waterproof connection of fibre optic cable. Halogen-free, flexible, flame-retardant heat-shrinkable tubing. Free of Pb,Cd, Hg,Cr+6, PBB and PBDE. Can be used in any enclosed area where a flame-retardant, halogen-free environment is required, such as the uderground, skyscraper, mass transit vehicles and ships. UL recognized at 600V. F mark.